How To Connect Time Capsule To Windows 10

Apple

Bjarne Larsen tin can no longer use his Time Sheathing because of a piece of work-required router on his home network that blocks Time Capsule over Wi-Fi. He'd similar to turn it into a networked bulldoze via ethernet instead.

Nevertheless, even though he'due south using a Thunderbolt-to-ethernet adapter plugged into one of the Fourth dimension Capsule's LAN ports, he tin can't become it to prove upwardly, and wonders why.

(I'd propose rather than convert it, erase the Time Capsule and sell information technology and use the gain to get a larger capacity bulldoze you lot connect directly to your Mac.)

The reason is that the Time Sheathing has to have a network address in order to work on a network. If it's not continued via its WAN (broad-area network) ethernet port or extending an existing Wi-Fi network, information technology can't receive an automatically assigned network address via DHCP (normally also coupled with NAT). As a result, the base station gives reverts to a "self-assigned" IP address in the range 169.254.x.ten.

Yous tin can set up this by giving a static private address to the Time Capsule and another static private accost on the same network to the ethernet adapter you connect to it. Instead of using a LAN port, where your ethernet adapter would receive an address over DHCP, you lot connect via the WAN port.

Follow these steps, and yous should be able to achieve your goal:

Plug your ethernet cable between the LAN port and your Mac.
Launch AirPort Utility on your Mac.
If the Fourth dimension Capsule doesn't appear in the graphic layout or when yous click Other Wi-Fi Devices in the upper left, perform a mill reset. (Encounter Apple tree's reset FAQ.)
Select the Fourth dimension Capsule and click Edit.

mac911 airport utility set static address — Prepare a static accost on your Time Capsule to make it reachable from your Mac.

In the Internet tab, choose Static from the pop-upwardly carte du jour. For IPv4 Address, Subnet Mask, and Router Accost, enter 192.168.200.1, 255.255.255.0, and 192.168.200.two. (No trailing commas or periods, simply the numbers separated by periods.)
In the Wireless tab, choose Off from the Network Mode popup menu.
In the Network tab, select DHCP and NAT from the Router Fashion popup carte du jour.
In the Disks tab, check the Share Disks over WAN box.
Click Update and look for the Fourth dimension Capsule to reboot.
Switch the cablevision from a Time Capsule LAN port to its WAN port.
Now on your Mac, open the Network system preference pane.
If the lock at lower left is in the closed position, click it and enter your administrative password.
Select your Thunderbolt (or other) ethernet adapter in the list of adapters at left.
In the configuration office of the pane, set the carte items to the following: Configure IPv4: Manually; IPv4 Address: 192.168.200.2; Subnet Mask: 255.255.255.0; Router: leave blank. (Again, make sure you're just entering the numbers separated past periods.)
Click Apply.

At present you should be able to mountain your Time Capsule drive in the Finder just like any networked bulldoze.

Inquire Mac 911

We've compiled a list of the near commonly asked questions we get, and the answers to them: read our super FAQ to see if y'all're covered. If not, we're always looking for new bug to solve! E-mail yours to mac911@macworld.com including screen captures as appropriate. Mac 911 cannot reply to email with troubleshooting communication nor can we publish answers to every question.

When you purchase through links in our manufactures, nosotros may earn a pocket-sized committee. This doesn't affect our editorial independence.

Source: https://www.macworld.com/article/229601/how-to-configure-a-time-capsule-as-an-ethernet-only-storage-device.html

Posted by: andersonmandist95.blogspot.com